Landoll Traveling Axle Model 440A


STANDARD EQUIPMENT

FRAME and FEATURES:

  • *Capacity: 40 Ton (80,000 lbs.)
  • Deck Rating: 50,000 lbs. in 10'
  • Estimated Base Weight: 19,610 lbs. (53') +/-3%
  • Main Frame: Fabricated 80,000 and 100,000 PSI Yield, 40" Center, Four-Beam Design
  • Crossmembers: Alternating 4" and 3" Junior I-Beam on 8" Centers
  • Pin Setting: 21"
  • Swing Clearance: 80"
  • Hitch: 5th-Wheel 2" Kingpin
  • Deck Width: 102"
  • Slope Drop: 90°
  • Loaded Deck Height: 37"
  • Loaded Ground Clearance: 14" at Bottom of Gooseneck
  • Decking: 1-3/8" Apitong Hardwood
  • Load Angle: 6.5°
  • Accessories: Flat Approach Plate with 6 Keyhole Tie Downs, Main Deck Center Slope Roller, Very Soft Transition from Lower to Upper Deck
  • Tie Downs: Double Key Hole Chain Slots with Square Stake Pockets on 16" Centers
  • Tool Box: Twin Side Mounted in Upper Deck with Lockable Doors (7”H x 34”W x 29”D)
  • Parking Stands: Jost Two Speed Landing Gear

SUSPENSION and UNDERCARRIAGE:

  • Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity
  • Undercarriage: (2) 4" x 126" - 48'; 4" x 126" and 4" x 138" - 50'; 4" x 138" - 53'; Accepts After-Market Dock Level Hydraulics System; Powder Coated Black
  • Grease: Centralized Grease System
  • Axles: (2) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters
  • Brakes: 12.25x7.5 Full Air / Spring Brakes ABS, 4S2M
  • Tires: 235/75R 17.5 Double Coin Tires
  • Rims: 17.5x6.75 Tubeless Rims
  • Wheels: Hub Pilot / Steel Outboard Brake Drums
  • Oil Seal Hubs: Internal Mated Assembly

HYDRAULICS:

  • Hydraulic Hook Up: Quick Couplers 2,500 PSI - 20 GPM at Controls, 50 GPM Max
  • Tilt Cylinders: (2) 6" x 30"
  • Hydraulic Winch: 12,000 lb. Worm Gear with Spring Tension and 85' of 1/2" Cable
  • Hydraulic Valve Body: Rexroth

ELECTRICAL:

  • Air / Electrical: 7-Way Receptacle
  • Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)
  • Wiring Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)
  • Turn Signal: Center Mounted Turn Signal

FINISH and COLOR:

  • Finish: Steel Grit Shot Blast to Bright Metal, Zinc Rich Primer
  • Powder Coat: TGIC Polyester Powder Coat, White / Black / Yellow / Blue / Red / Green / Sapphire Blue / Dark Gray
  • Decals: Hi-Visibility Reflective Package

*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.


OPTIONAL EQUIPMENT

BULKHEADS:

  • 48" High Mesh 102" Powder Coated Black
  • Steel Bulkhead Wings
  • Aluminum Bulkhead Wings
  • Bolt-On Binder Storage Rack for 48" Bulkheads
  • LED Work Light-Dual (Mounted on Bulkhead)
  • Aluminum Light Bar, Bulkhead Mounted, Includes Dual LED Work Lights, Stop / Turn / Tail Lights, Aluminum Chain / Binder Rack
  • Spare Tire Carrier - 48" Bulkhead, Front Mounted
  • Spare Tire Carrier - 48" Bulkhead, Rear Mounted
  • Spare Tire Carrier - Front Pocket Mt
  • Dual LED Strobe Beacons

GOOSENECK:

  • Heavy Duty Gooseneck - (Adds 24" to Overall Length)
  • Slope Splash Shield (Mud Flaps)

PARKING STANDS:

  • Pin Drop in Lieu of Standard
  • Hydraulic Parking Stands

TIE DOWN RINGS:

  • Flush Mounted D-Rings (Each)
  • D-Ring Bolt on at Winch (Each) (Two Locations Available)
  • Flush Mounted Angled D-Rings (Each)
  • Recessed Mounted D-Rings (Each)
  • Single Slot Ratchet Winch for 4" Nylon Strap (Weld On - Less Strap; Opposite Side Tie Down Required)
  • Tie Down Stake Pocket for Opposite Side of Ratchet Winch (P/N 100291)
  • Tie Down "J" Hook for Opposite Side of Ratchet Winch (P/N 142518)

WINCH AND ACCESSORIES:

  • ***All Winches Mounted on Upper Deck Only***
  • Wireless Remote Control - Six Function

*BRADEN WINCH OPTIONS*

  • Delete Standard 12,000 lb. Braden Winch
  • 20,000 lb. Braden Winch in Lieu of Standard
  • 20,000 lb. Braden Winch with Pivoting Cable Roller Guide, Air Tension and Air Release in Lieu of Standard
  • Cable Guide (4-Way Rollers) for Braden 12K, 20K, (Not Available with Pivoting Guide)
  • Winch Guard for Braden 12 / 20K Winch

*WARN PLANETARY WINCH OPTIONS*

  • 12,000 lb. Warn Winch with Air Release in Lieu of Standard
  • 20,000 lb. Warn Planetary Winch, 2-Speed, with Air Release / Spring Tension in Lieu of Standard
  • 30,000 lb. Warn Planetary Winch, 2-Speed, with Air Release / Spring Tension in Lieu of Standard
  • Cable Roller Guide (4-Way Rollers) for 20K and 30K Warn Planetary Winch

DECK AND ACCESSORIES:

  • 1/8" Steel Tread Plate in Lieu of Standard Wood
  • 1/8" Steel Tread Plate Over Standard Wood (Lower Deck Only)
  • Deck Strap 1-1/4" x 9" Track Area Beside Main Beam
  • Deck Strap 1-1/4" x 9" Track Area Beside Outer Beam
  • Special Deck Strap Options:
  • Deck Strap 1" x 9" Track Area Beside Main Beam (Level with Main Beams)
  • -(Requires Both ** Options Below)
  • Deck Strap 1" x 9" Track Area Beside Outer Beam (Level with Outer Beams)
  • -(Requires Both ** Options Below)
  • **1" Apitong in Lieu of Standard 1-3/8" Complete Trailer (Level with Main Beams)
  • **Approach Plate Level with Main and Outer Beams (1" Above Crossmembers)
  • Rub / Chain Rail-Web Mounted (Price per Foot of Rail)
  • Skid Plate for Container 3/8" x 6" (102" Wide Only)
  • Skid Plate for Container 3/8" x 10.5" (108" Wide Only)
  • Skid Plate for Container 3/8" x 14.75" (120" Wide Only)
  • Toe Board 3/8" x 2-1/2" on Lower Deck
  • Toe Board 1" Square on Lower Deck
  • Keyhole Tie Downs for Center Deck (Level with Wood)
  • 1/8" Steel Tread Plate Over Approach (Bolt-On)
  • Landoll Traction Plate Over Approach Plate, Bolt-On (P/N 148564)
  • Upper Deck Slope Roller in Lieu of Standard Wear Plate
  • Folding Step Assembly with Grab Handle Built Into Slope (Either Street, Curb or Both)
  • Front Extension Ramps (In Track Area) (24"L x 28"W Flip-Over, Upper Deck, 3,000 lb. Capacity Distributed)
  • 27" Aluminum Pull Out-Side Extensions (Capacity Not to Exceed 50% of Trailer Capacity - Frames will have 4" Square Crossmembers on 16" Centers with 3" Jr I-Beams Between Tubes
  • Outriggers Swing Out (Less Planks) (Lower Deck Only) (Capacity Not to Exceed 50% of Trailer Capacity) (Steel)
  • Stake Pocket Deep (P/N 176872)
  • Undercoating, Petroleum Based
  • Swing-Out Side Turn Signal / Emergency Flasher Lights (1) Pair - Locations Available, Upper Deck Behind Tool Box, Lower Deck Behind Center Turn Light
  • Dual Slope Mount LED Worklights

SUSPENSION:

  • Dock Level Hydraulic (1) Pair 62,000 lb.
  • Air Dump Valve
  • Air Weigh Digital Scale System LoadMaxx (Trailer Only)
  • LoadMaxx ComLink Cable Kit (Cable Connects Trailer Unit to Tractor Scale)
  • Strobe Light Package in Bumper (2 Amber Strobe Lights)
  • Galvanized Bumper in Lieu of Standard Painted Bumper

HYDRAULIC POWER SOURCE:

  • Wet Kit for Tractor (Includes 30 Gallon Steel Tank)
    • Polished Aluminum Hydraulic Tank, (19"W x 24D") (Side Mount) in Lieu of Standard
    • Shipped Loose with Trailer or Factory Installed
  • Hydraulic Engine Package - Upper Deck with Cover Kohler EFI 25 HP Gas
  • Polished Aluminum Hydraulic Tank, (19"W x 24D") (Side Mount) in Lieu of Standard
  • Hydraulic Engine Package - Front Extension Mount with Cover, Kohler EFI 25HP Gas
  • Hydraulic Quick Couplers 1 Male / Female (Matches Standard Trailer Couplers) (P/N 105902)

TIRES AND RIMS:

  • 235/75R 17.5 Continental Tires in Lieu of Standard
  • 245/70R 17.5 Michelin (Multi T) LRH Tires in Lieu of Standard (235 Not Avail)
  • 255/70R 22.5 Double Coin Tires in Lieu of Standard
  • 255/70R 22.5 Continental Tires in Lieu of Standard
  • 255/70R 22.5 Michelin Tires in Lieu of Standard
  • Spare Double Coin Tire and Hub Pilot Type Rim (235/75R 17.5)
  • Spare Continental Tire and Hub Pilot Type Rim (235/75R 17.5)
  • Spare Michelin Tire and Hub Pilot Type Rim (245/70R 17.5)
  • Spare Double Coin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Spare Continental Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Spare Michelin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • 17.5 Aluminum Wheel (8-Bolt Polished) in Lieu of Standard (Each)
  • 17.5 Aluminum Wheel (8-Bolt Machined) in Lieu of Standard (Each)
  • 22.5 Aluminum Wheel (10-Bolt Polished) in Lieu of Standard (Each)
  • 22.5 Aluminum Wheel (10-Bolt Machined) in Lieu of Standard (Each)
  • Hubometer
  • Pressure Guard Tire Inflation N/A
  • Crossfire Air Equalizers (Price per Axle)
  • Meritor Tire Inflation / PSI

SPECIAL PRICES:

  • Hot Dip Galvanizing (Trailer Frame is Totally Submerged) - Adds Minimum of 3 Weeks to Delivery
  • Paint Over Galvanizing - Sides Only with Standard Colors Only
  • Paint Over Galvanizing - Top Surface Only with Standard Colors Only
  • Special Paint: Contact Factory

*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.



Downloads

Credit Application Brochure