Landoll Traveling Axle Model 343A


STANDARD EQUIPMENT

FRAME and FEATURES:

  • *Capacity: 10,000 lbs.
  • Deck Rating: 10,000 lbs. in 10'
  • Estimated Base Weight: 16,000 lbs. (50') +/-3%
  • Main Frame: Fabricated 80,000 PSI Yield Beams
  • Crossmembers: 3" Jr. I Beam on 12" and 24" Centers
  • Pin Setting: 43" Set-Back, 75" CA Tractor Minimum; 18.5" Setting
  • Swing Clearance: 78" Rear and Forward Swing Clearance
  • Deck Width: 102"
  • Loaded Deck Height: 45" at Rear Approach Plate
  • Decking: 1/8" Steel Tread Plate, 10" Recessed Trough - Full Length, Skid Plate 10" Wide / Side Outer Frame 6-1/2" Tall, 4" Bottom Flange
  • Load Angle: 12°
  • Accessories: Inner Receiver Bushing on 24" Centers for Side Guides, Hi-Cube Container Low-Profile, Centralized Grease System, Two Stage Powder Coat Paint, 29" Approach Plate with (4) Keyhole Tie Downs and Shoe Lock Down Slots, Wireless Remote Control Hydraulics
  • Tool Box: (1) Street, (1) Curb Side; 42"W x 28"D x 9"H with Lockable Door
  • Tie Downs: Double Keyhole Chain Slots 24" Centers on Outer Beam
  • Parking Stands: Jost Two Speed Landing Gear

SUSPENSION and UNDERCARRIAGE:

  • Suspension: Neway Air Ride RLU228, 22,500 lb. Capacity
  • Axles: (1) 25,000 lbs. Dual Tire, Oil Bath Bearings (RTAC Legal Width), Automatic Slack Adjusters
  • Brakes: 16.5x7 Full Air / Spring Brakes, ABS 2S1M
  • Tires: 255/70R 22.5 LRH Double Coin
  • Rims: 22.5x8.25 Tubeless
  • Wheels: Hub Pilot Wheel / Steel Outboard Brake Drum
  • Oil Seal Hubs: Internal Mated Assembly

HYDRAULICS:

  • Hydraulic Hook Up: Quick Couplers 2,500 PSI - 20 GPM at Controls, 50 GPM Max
  • Hydraulic Winch: Gear Box, 12,000 lb., with Continuous Power Chain Drive Load System 1/2" Chain
  • Hydraulic Valve Body: Rexroth

ELECTRICAL:

  • Air / Electrical: 7-Way Receptacle
  • Lights: Grote Clear Lens LED with Chrome Bezel (10-Year Warranty)
  • Harness: Grote “Xtreme” Wiring Harness (7-Year Warranty)

FINISH and COLOR:

  • Finish: Steel Grit Shot Blast to Bright Metal
  • Powder Coat: TGIC Polyester Powder Coat, White / Black / Yellow / Blue / Red / Green / Sapphire Blue / Dark Gray
  • Decals: Hi-Visibility Reflective Package


*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.

Options

OPTIONAL EQUIPMENT

PARKING STANDS:

  • Pin Drop in Lieu of Standard

TIE DOWN RINGS:

  • 3/8" x 12'6" Chain with Rear Container Hold Down (1 Pair)
  • Load Binder 3/8" Ratchet Style (1 Pair)
  • (1) Pair Lock Pins for Front Lockdowns (Mounted on Front Cross Tube)
  • (1) Pair Shoe Lock Tie Down for Approach Plate

WINCH AND ACCESSORIES:

CHAIN DRIVE LOAD SYSTEM INCLUDES:

  • 12,000 lb. Gear Box Chain Drive System
  • Chain and Grab Hook Assembly 42" x 1/2"
  • Pusher / Dozer Blade
  • Chain Connector
  • Container Load Bridle
  • Double Container Stops (Hold Down Between 2 - 20')
  • Container Stop Front / Hold Down (Lock in Bridle)

OPTION IN LIEU OF ABOVE STANDARD

  • 12,000 lb. Warn Planetary Winch, 2 Speed, with Air Release
  • Container Load Bridle
  • Container Stops, Front / Hold Down (Lock into Bridle)

OPTION IN LIEU OF ABOVE STANDARD

  • 20,000 Lb. Warn Planetary Winch, 2 Speed, with Air Release
  • Container Load Bridle
  • Container Stop, Front / Hold Down

DECK AND ACCESSORIES:

  • Side Guide Anchors (Bolt-On) (1 Pair)
  • Side Container Guide Panels (1 Pair) 40" x 4"
  • Chain and Grab Hook Assembly 42" x 1/2"
  • (1) Pair Shoe Lock Tie Downs for Rear Corner Casting
  • Aluminum Ladder LH Front Mounted
  • Aluminum Ladder RH Front Mounted
  • Toe Board 3/8" x 2-1/2" on Outside of Skid Plate
  • Bolt-On Strap Ratchet and Hook Assy

SUSPENSION:

  • Galvanized Bumper in Lieu of Standard Painted Bumper

HYDRAULIC POWER SOURCE:

  • Wet Kit for Tractor (Includes 30 Gallon Steel Tank)
    • Shipped Loose with Trailer or Factory Installed
  • Hydraulic Quick Couplers 1 Male / 1 Female (Matches Trailer)
  • Polished Aluminum Hydraulic Tank, (19"W x 24D") (Side Mount) in Lieu of Standard
  • Hydraulic Engine Package, Front Mounted Over Gear Box / Winch with Cover Kohler EFI 25 HP Gas

TIRES AND RIMS:

  • 255/70R 22.5 Michelin Tires in Lieu of Standard
  • 235/75R 17.5 Double Coin Tires in Lieu of Standard 22.5
  • Spare Double Coin Tire and Hub Pilot Rim (235/75R 17.5)
  • Spare Double Coin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Spare Michelin Tire and Hub Pilot Type Rim (255/70R 22.5)
  • Hubometer
  • Pressure Guard Tire Inflation N/A

SPECIAL PRICES:

  • Hot Dip Galvanizing (Trailer Frame Totally Submerged) - Adds Minimum of 3 Weeks to Delivery
  • Paint Over Galvanizing - Top Surface Only Inside of Skid Plate with Standard Colors Only
  • Paint Over Galvanizing - Outer Skid Plate and Sides Only with Standard Colors Only
  • Special Paint Color

*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.

Specifications subject to change without notice.



Downloads

Credit Application Brochure